|
Terminating Stud System
The terminating stud system has a clean simple look with no jaw. It must be used on a straight run and attached in a through hole with the button on the backside at the baluster.
Terminating stud
|
PART NUMBER |
WIRE SIZE (in.) |
A |
B |
D |
Ds |
RHS |
|
TS018 |
1/8 |
2 |
9/16 |
0.250 |
0.219 |
1/4 |
|
TS316 |
3/16 |
2-1/8 |
9/16 |
0.359 |
0.313 |
3/8 |
|
TS014 |
1/4 |
2-1/2 |
9/16 |
0.494 |
0.438 |
7/16 |
Terminating stud turnbuckle
|
PART NUMBER |
WIRE SIZE (in.) |
A CLOSED POSITION |
B |
THREAD SIZE (in.) |
D |
Ds |
|
TBTS018 |
1/8 |
7 |
9/16 |
1/4" - 28 |
0.250 |
0.219 |
|
TBTS316 |
3/16 |
7-1/2 |
9/16 |
1/4" - 28 |
0.359 |
0.313 |
|
TBTS014 |
1/4 |
8-1/8 |
9/16 |
5/16" - 24 |
0.494 |
0.438 |
Button Attachment
WARNING:
Not for use for
overhead lifting!
|
Ds = AFTER SWAGE DIA.
|
RHS = Recommended hole size
|
Home Page
~ Project Applications
~ Deck Toggle System
~ Jaw Toggle System
Terminating Stud System
~ Threaded Stud Systems
~ Lag Turnbuckle System
Uni-Ball System
~ Epoxy-Coated and Galvanized Barrier Systems
|
