|
Deck Toggle System
The Deck Toggle System can be mounted to any flat surface and is held in place by two tabs suitable for through bolting. The best feature of the deck toggle is it can articulate 140 degrees.
Deck toggle
|
PART NUMBER |
WIRE SIZE (in.) |
A |
B |
TOGGLE HOLE SIZE (in.) |
D |
Ds |
|
DT018 |
1/8 |
2-1/8 |
1-9/16 |
1/4 |
0.250 |
0.219 |
|
DT316 |
3/16 |
2-1/8 |
1 9/16 |
1/4 |
0.359 |
0.313 |
|
DT014 |
1/4 |
0 |
1-3/4 |
5/16 |
0.494 |
0.438 |
Deck toggle turnbuckle
|
PART NUMBER |
WIRE SIZE (in.) |
A CLOSED POSITION |
B |
TOGGLE HOLE SIZE (in.) |
D |
Ds |
THREAD SIZE (in.) |
|
TBDTS018 |
1/8 |
6 |
1-9/16 |
1/4 |
0.250 |
0.219 |
1/4" - 28 |
|
TBDTS316 |
3/16 |
6-1/4 |
1-9/16 |
1/4 |
0.359 |
0.313 |
1/4" - 28 |
|
TBDTS014 |
1/4 |
6-3/4 |
1-3/4 |
5/16 |
0.494 |
0.438 |
5/16" - 24 |
WARNING:
Not for use for
overhead lifting!
|
Ds = AFTER SWAGE DIA.
|
RHS = Recommended hole size
|
Home Page
~ Project Applications
~ Deck Toggle System
~ Jaw Toggle System
Terminating Stud System
~ Threaded Stud Systems
~ Lag Turnbuckle System
Uni-Ball System
~ Epoxy-Coated and Galvanized Barrier Systems
|
